Fibre Glass

Grill for rear spoiler Singer Look.
The grill is made from aluminium mat / satin finish

The aluminium grille is available on request and can only be ordered in combination with the spoiler #TK339.

Fits:
Porsche 964

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front bumper with brake air ducts for 911 2,8 RSR. With mounting brackets.



Fits:
Porsche 911 1966-73
Porsche 911 1974-89

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Ducktail for 911 with Including thread inserts for hinges and bonnet lock.

With integrated fibreglass frame.



Fits:
Porsche 911 2.7 RS
Porsche 911 2.8 RSR

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front bumper for 911 2,8 RSR with mounting brackets.



Fits:
Porsche 911 1966-73
Porsche 911 1974-89

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Oil cooler scoop.



Oil coooler scoop to be mounted into factory bumper.

Fits: all 911 from 74-89.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK415

The product you are viewing cross references to these numbers

Front spoiler 934 "Almeras" look. Low version for rally use. Group 4 front spoiler.



Fits:
Only for 911 SC / Carrera, not Turbo

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK412

The product you are viewing cross references to these numbers

Rain shields for Weber and PMO carburators.



Made from fiber cloth with a honey-coloured special resin.

Fits:
Porsche 911 R / ST
Porsche 906
Porsche 914-6 GT


Available in three combinations:
2 x flat
2 x bent
1 x flat + 1 x bent

Singer Look rear spoiler to mount on the 964 engine lid.

Including two loose blinds and an integrated rack to fix the lamella.
The alumnium grille is available on request and can only be ordered in combination with the spoiler.



Fits:
Porsche 964

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Rear spoiler 965 Turbo S Le Mans GT.

With 8-way adjustable rear wing, integrated air channels, and inner frame / air duct for the intercooler.

The rear spoiler comes with the 4 racing quick fasteners.



Fits:
Fits all Porsche 964 Turbo / 965.
Can also be mounted on all other 911/964 models from 65-94.


Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front spoiler lip to be mounted on 965 Turbo S Le Mans GT front bumper TK399 (development 1994).



Fits:
all Porsche 964 Turbo / 965


Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front spoiler lip 965 Turbo S Le Mans GT (factory state 1993)

Front spoiler lip to be mounted on 965 Turbo S Le Mans GT front bumper (factory state 1993).



Fits:
all Porsche 964 Turbo / 965


Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front bumper 965 Turbo S Le Mans GT with mounting slot for spoiler lip.

The spoiler lip is available as option in two different versions (factory state 1993 / development 1994)



Fits:
all Porsche 964 Turbo / 965


Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Rocker panels.
One-piece design side skirts 965 Turbo S Le Mans GT (Factory state 1993).



Fits:
all Porsche 964 Turbo / 965

Price per pair.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Air Ram for 996 GT3 / GT3 RS rear spoiler.



Fits:
Porsche 996 MK2 GT3 or GT3 RS rear spoilers from 2002-2004

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front bumper with mounting brackets for shortened shock absorber tubes.



Fits:
Porsche 911 3.0 RS

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK8

The product you are viewing cross references to these numbers

Lightweight doors 911 (factory style), with door card preparation.



Our CNC-miled aluminum hinges with brass bushings and pin are optionally available.

Including all necessary thread inserts for all door attachment parts. Made to fit the factory window frames

Fits: all Porsche 911 from 1965-1989

Price is per PAIR of doors

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK284A

The product you are viewing cross references to these numbers

Oil cooler blank for RS or RSR front bumper.



Fits:
Porsche 911 1969-73

Material:
Made from Fiber Glass. GRP

Product Type:
Replica

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Right blockoff plate for big fan housing 911.



Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Left blockoff plate for big fan housing 911.



Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front fender flares for 914 wide body
The flares are made from fiberglass (lightweight parts).



Price per pair.

Fits:
Porsche 914 wide body

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front bumper 916916 wide body. The bumper is made from fiberglass (lightweight part).



Fits:
914 wide body.

The bumper includes fully variable mounting brackets (all axis), which allow you an easy and optimal mounting of the bumper.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Engine shroud 911 - Insert for K-Jetronic.



Insert for air duct to oil cooler for K-Jetronic engines. Provides more space for intake manifold.

Made from fiber cloth with a honey-coloured special resin.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Engine shroud - fan housing.



Fits:
Porsche 993 C2 / C4

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK243A

The product you are viewing cross references to these numbers

Front engine tin.



Fits:
Porsche 993 C2 / C4

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK243C

The product you are viewing cross references to these numbers

Right engine tin.



Fits:
Porsche 993 C2 / C4

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Click 'Zoom in' for large parts diagram.
Diagram ref no 9

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK243E

The product you are viewing cross references to these numbers

Left engine tin.



Fits:
Porsche 993 C2 / C4

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Click 'Zoom in' for large parts diagram.
Diagram ref no 7

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK243D

The product you are viewing cross references to these numbers

Rear engine tin.



Fits:
Porsche 993 C2/C4

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Click 'Zoom in' for large parts diagram.
Diagram ref no 10

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK243B

The product you are viewing cross references to these numbers

Engine shroud 911 - small fan housing.



Fan housing for small alternators like 911 ST or RSR.

Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Engine shroud 911 - large fan housing



Engine Fan housing for large alternators like any stock 911.

Made from fiber cloth with a special resin, which gets the authentic amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK210A

The product you are viewing cross references to these numbers

Right block-off plate for small fan housing 914.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Left block-off plate for small fan housing 914.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Left block-off plate for big fan housing 914.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Right block-off plate for big fan housing 914.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Cover for full flow oil filter 914 GT.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Front engine tin 914 GT.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK211

The product you are viewing cross references to these numbers

Left engine tin 914 GT.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK211E

The product you are viewing cross references to these numbers

Left engine tin 914 GT.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK211D

The product you are viewing cross references to these numbers

Rear engine tin Porsche 914 GT.



Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK211C

The product you are viewing cross references to these numbers

Engine shroud 914 GT - fan housing big.



Fan housing for big alternator 914/6.

Made from fibre cloth with a special resin, which gets the authentically amber colouring after impact of engine heat.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK211B

The product you are viewing cross references to these numbers

Rear fender flares 914 wide body for 11" wheels. The flares are made from fiberglass (lightweight parts).

Price per pair.



Fits:
all Porsche 914 models

Note:To mount these panels you need the whole 914 wide body kit.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.