Manifold / Headers

Equal length exhaust manifold with catalytic converter. 
Sold as a pair - left and right



Fits:
Porsche 981 Boxster - 2012 to 2016
Porsche 981 Boxster S - 2012 to 2016

Porsche 981 Boxster GTS -  2012 to 2016
Porsche 981 Boxster Spyder - 2016
Porsche 981 Cayman - 2013 to 2016
Porsche 981 Cayman S - 2013 to 2016
Porsche 981 Cayman GTS - 2013 to 2016
Porsche 981 Cayman GT4 - 2016

Made from SS304L lightweight stainless steel these exhaust manifolds offer reduced back pressure with higher flow

• Performance gains of 20hp minimum and 20nm
• Improved throttle response
• Improved exhaust note with no drone, resonation or vibration
• Direct fit no remap required but recommended
• No CEL
• Heat shielded to reduce radiant heat and speeds up exhaust gas velocity

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9M81113211

The product you are viewing cross references to these numbers

These titanium components are resistant to rust and corrosion, which can be a common issue with traditional steel studs and nuts. This corrosion resistance ensures that the studs and nuts maintain their integrity, allowing for easy removal and installation when necessary. They are the perfect upgrade for Porsche enthusiasts who demand the ease of access to vehicle's exhaust system. 



• Ultra-high-performance product
• Use of Titanium Ti6Al4V technology

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANSTUDS18

The product you are viewing cross references to these numbers

Exhaust manifold bolts M8x21. Made out of Titanium
Set of 18 pcs



Titanium is a highly corrosion-resistant material, which is particularly important in exhaust systems due to the exposure to extreme heat and moisture. The corrosion resistance of titanium bolts ensures longevity and reduces the risk of premature failure, ultimately saving the owner from costly repairs.

Fits:
Porsche 987.2 Boxster 2009-2012
Porsche 987C.2 Cayman 2009-2012
Porsche 997.2 Carrera 2009-2012
Porsche 981 Boxster 2012-2016
Porsche 981C Cayman 2014-2016
Porsche 991 MKI 2012-2016
Porsche Cayman GT4 2016

Click 'Zoom in' for large parts diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TITANTORXSHORT18

The product you are viewing cross references to these numbers

Fabspeed Exhaust Race Headers.

  

Fabspeed's Race Headers for the Porsche Cayman GT4 will get you out of the corner fast and maximize your pulling power on the straights! Designed for track and off-road use, these cat less long tube headers provide maximum exhaust flow from the engine cylinders straight into the exhaust system.

Get out of the corner fast and maximize your pulling power on the straights! Designed for track and off-road use, these cat less long tube headers provide maximum exhaust flow from the engine cylinders straight into the exhaust system.

Fabspeed's Race Headers for the Porsche Cayman GT4 are built to optimize the engine's exhaust flow for maximum performance. Our precision-engineered headers add up to 18 horsepower at the wheels and 15 ft/lbs of torque at 6300 RPM, increasing the already impressive performance of the Porsche GT4. Down low these Race Headers give you a kick in the pants, adding 27 whp and 38 ft/lbs of torque at 3700 RPM.

With Race Headers from Fabspeed, your Cayman GT4 will strike fear into the hearts of 911 owners at the track. Set yourself apart from the factory-equipped crowd with these unbeatable performance upgrades and watch your Porsche's power - and your race results - climb.

FEATURES:
• Fits all Porsche 981 Cayman GT4 / Boxster Spyder vehicles (2015+)
• Adds 27 whp and 38 ft-lbs of torque at 3700RPM and 18 whp and 15 ft/lbs at 6300 RPM
• Saves 10 lbs from the rear of the vehicle compared to the full OEM exhaust system
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved sports car sound
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

PLEASE NOTE: The Cayman GT4 Race Headers do not include catalytic converters, and are recommended for track/off-road use only. In most vehicles, removing the catalytic converters may trigger a Check Engine Light. HOWEVER, in over 200 miles of testing, our development vehicle did NOT trigger a CEL with these Race Headers installed.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981GT4LTRHDR

The product you are viewing cross references to these numbers

Fabspeed Exhaust Sport Headers.



Low-end power and sound that you can enjoy every day! The perfect complement to either the factory exhaust system or Fabspeed's performance exhaust systems, these high-flow headers are designed around HJS catalytic converters, making them the best upgrade for more enjoyable street driving and emissions compliance.

Designed with noticeable street performance in mind, these Sport Headers provide an additional 26 whp and 39 ft/lbs of torque at 3600 RPM. This translates to significantly better acceleration and throttle response when powering away from a stop light or merging onto your favorite highway. Thanks to the world-class performance of the HJS catalytic converter cores, your GT4 stays emissions-compliant in most regions and will not throw a Check Engine Light.

In addition to the performance gains, Fabspeed's GT4 Sport Headers also add great character to the exhaust note by improving the overall volume and tone.

FEATURES:
• Fits all Porsche 981 Cayman GT4 / Boxster Spyder vehicles (2015+)
• Includes German-imported 200-cell HJS Sport • Catalytic Converters for maximum performance and reliability
• Adds 26 whp and 39 ft-lbs of torque at 3600RPM, providing significantly better performance during street acceleration
• Constructed from equal-length T304 stainless steel C.N.C. mandrel-bent tubing for improved torque and equalized engine pulsing
• More power and torque across the RPM band and dramatically improved exhaust sound
• Direct replacement for the OEM headers with no cutting or welding required
• All Fabspeed performance products are backed by the Fabspeed Lifetime Limited Warranty

PLEASE NOTE: Fabspeed's 200-cell high-flow catalytic converters are not C.A.R.B. certified and are for Off-Road Use ONLY in the state of California.

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FSPOR981GT4SHDR

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Inconel 718 and aerospace technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-In-18

The product you are viewing cross references to these numbers

High performance stud + nut kits for the exhaust manifold to cylinder head for Porsche. Using titanium and Inconel alloy studs, aerospace lock nuts, and a well-thought and balanced combination of metals and plating/coatings, our fasteners will perform better than the traditional fastener. They will never oxidize, and hence will unscrew easily when required.



Novel ultra-high-performance product
• Use of Titanium Ti6Al4V technology
• Extreme perceived quality

Contains 18 x Studs, Nuts & Washers

Fits:
Porsche 996 Turbo / GT3 / GT2
Porsche 997 Turbo / GT3 / GT2
Porsche 997.2 ALL
Porsche 991 ALL
Porsche 992 ALL
Porsche 987 2009-12
Porsche 981
Porsche 718 GT4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-Ti-18

The product you are viewing cross references to these numbers